Goretex Repair Kit Waterproof Jacket

The essential field repair kit for all types of repairs including tents, sleeping pads, rainwear, backpacks, boots and more. Kit includes two adhesive backed GORE-TEX® fabric pressure-sensitive patches. Ideal for GORE-TEX and WINDSTOPPER® Fabric. Rectangle – 10cm x 5cm Circle – 7.5cm diameter REPAIR KIT INSTRUCTIONS The patches supplied in this kit will provide a temporary water resistant repair for GORE-TEX® fabric products. · Patches should be kept in sealed plastic bag until used. · Area to be repaired must be clean and dry. · Patch will not adhere effectively to loose debris, grease or oil. · Patch should overlap tear by at least 1/2″ in all directions. · Remove release paper from back of patch. Lay GORE® product on a smooth flat surface and apply patch using finger pressure (adhesive side down). Rub patch surface in a circular motion from the center out covering the entire patch area. · Product can be used immediately; however, the adhesive will continue to strengthen over the next 12 to 24 hours. · The durability of the patch can be enhanced by applying heat and moderate pressure. Use a clean iron and set to medium heat. Press with moderate pressure in a circular motion for 30 seconds.