Lightwave g20 Trek 2 People Tent

At Lightwave, we appreciate that not everyone is insistent upon having the very lightest tent on the market, or one using the strongest or most waterproof fabrics. For the large majority of users, in fact, what matters is that their tent will shelter them from some serious weather when it hits, is light enough to carry as part of a pack-load, and is durable enough to provide a decent amount of use for several years. And all without breaking the bank. The trek range strikes an optimum balance between all these end-user requirements – better, we believe, than any other tent on the market – and for this reason has been the backbone of the Lightwave tent range for many years. Lightwave trek tents are all pitched inner-first, the system we like best (see why under pitching) and which is the basis for their outstanding performance in wind and bad weather. Trek fabrics and components are selected for maximum performance and durability at the most reasonable price, while weight is kept to a sensible minimum thanks to Lightwave’s no-frills approach to design. Weight – 2.60 kg Packed size – 43 x 19 cm Flysheet 70 g/m2, 40d nylon 6.6 ripstop, silicone-coated both sides, 5000 mm hydrostatic head The trek flysheet is made from 40-denier nylon, which strikes an excellent balance between weight and strength. Like all Lightwave tent flysheets, it uses high-tenacity nylon 6.6 yarn (which has a higher tensile strength than normal nylon) and is silicone-coated on both sides (for water-resistance). Silicone coatings maintain the inherent strength of the fabric, whereas the conventional polyurethane (PU) coatings typically used on most tents reduce the tear strength by up to 70%. Groundsheet 135 g/m2, 150d polyester taffeta, 3-pass PU-coated (90 g/m2, 70d polyester taffeta, on the t10 trek & t10 trek xt) 5000 mm hydrostatic head, factory-taped seams The trek groundsheet is made from a very robust 150-denier polyester (except on the compact t10 models which use a 70-denier nylon). This is an area where many tents use 110-denier or even 70-denier fabrics to save weight and keep manufacturing costs down. For the user, however, this can be a false economy, since lighter groundsheets often need the additional reinforcement of a footprint (a separate layer of fabric between groundsheet and ground), which adds up to an even heavier tent as well as extra cost. Inner canopy 45g/m2, 40d nylon 6.6 ripstop, DWR treated Poles Yunan 9.00mm 7001-T6 aluminium alloy Trek poles are made of the same 7001-T6 alloy employed in probably 90% of all backpacking tents in the world. Whilst there are lighter alloys around, we always come back to the 7001 series because it is so reliable and resilient. Given that 90% of customer service on tents involves pole replacements, the 7001 poles give both us and our customers the least amount of hassle. Pegs Lightning pegs, 11 g each, square section Pegs are very important – without them, no tent could withstand anything more than the slightest breeze. Trek tents use our Lightning peg – similar in weight to most standard pegs, but substantially stronger and capable of living with some serious abuse. Costing four times as much as normal wire pegs, these are seldom seen on all but the most highly specified and expensive tents. Guylines 3.00 mm nylon, 3 m length, Linelok adjusters Trek guylines are made of standard 3.0 mm nylon. They work, and with our Linelok adjusters they work and adjust very well.